General

Entering Bootloader Mode - CRSF & FreedomTX
Please follow the steps below to enter Bootloader mode of the Crossfire TX or FreedomTX on the TBS Tango2. Make sure the device is turned OFF and u...
Mon, 3 Feb, 2020 at 1:31 PM
How to calibrate the TBS Tango 2
Please follow the steps below to calibrate the TBS Tango 2 Gimbals.  Power up the unit. Long Press the <MENU> button to enter the Radio Setup Pa...
Mon, 20 Jan, 2020 at 3:35 PM
How to force shut down the Tango 2.
If for any reason you tango2 would not respond and you need to force it to shut down, simply press and hold the power button for at least 20 seconds. 
Mon, 20 Jan, 2020 at 3:39 PM
Changing Stick Mode
Please follow the steps below to change stick modes on the TBS Tango 2.  Video Guide:   Steps: Pry out the Grip Pads Undo 6 x M2 Hex Screws.   T...
Wed, 12 Feb, 2020 at 5:31 PM
Adjusting Spring Tension
Please follow the diagram below to adjust spring tension of the TBS Tango 2. 
Wed, 12 Feb, 2020 at 4:19 PM
Opening the Housing of the Tango 2
Video Guide:
Tue, 21 Jan, 2020 at 9:31 AM
Setting up the Tango2 for Velocidrone or other simulators.
Please follow the steps below to set up the Tango2 for Velocidrone or other simulators.   Connect the Tango2 with the computer via USB.  Once connec...
Mon, 20 Jan, 2020 at 7:51 PM
TBS Tango 2 - SD Card Content
[SD Card Contents Download] If you are replacing files of the SD card of your Tango 2, please pay attention to the following: 1. RADIO/radio.bin and ...
Wed, 5 Feb, 2020 at 6:52 PM
Swapping Springs
Wed, 12 Feb, 2020 at 5:25 PM