5.8GHz Video System

Does the Unify Pro HV / V2 / Race have thermal protection that will reduce power or shut it down if it gets too hot?
The Unify Pro line of video transmitters does not need any additional thermal protection. Even running at full power without an antenna connected, it can wi...
Wed, 11 Jan, 2017 at 2:37 PM
Unify PRO issues
Unify PRO has no more range --> most propably your VTX is in PIT-Mode. Please leave PIT mode according to User Manual.
Sat, 10 Jun, 2017 at 8:46 AM
Unify PRO- Red light flashing constantly
When the Red LED constantly flashes, the Ground for V.Bat in is broken.
Wed, 28 Jun, 2017 at 4:03 PM
Unify PRO HV connector ripped off - direct solder points
If you physically damaged a Unify PRO HV main connector, then you still can direct solder the wires directly to the components. Here you see the direct ...
Sat, 8 Jul, 2017 at 8:11 AM
SmartAudio Lite does not work on my FC
Unify Nano vtx is using SmartAudio Lite with two limitations. It requires 3.3V level (Standard Smartaudio accept 0.9V audio level). It requires software ...
Mon, 10 Dec, 2018 at 5:56 PM
TBS Fusion stuck in bootloader mode.
If your TBS Fusion happens to be stuck in bootloader mode, you may flash the unit with the following method. *A fix for this issue is deployed with any ...
Wed, 22 Feb, 2023 at 11:29 AM