General
The Crossfire RSSI has been scaled up in the most recent versions to a scale of 0% to 300%. This is because of the increased throughput on the Crossfire dat...
Mon, 9 Jan, 2017 at 5:36 PM
If there is no frequency selection and only a limited power selection is available under "Menu" -> "General", your TBS CROSSFIRE is l...
Mon, 14 Dec, 2020 at 9:47 AM
How to update the TBS Crossfire firmware ? 1. Download the TBS Agent at http://team-blacksheep.freshdesk.com/solution/articles/4000085171-tbs-agent- ...
Tue, 28 Mar, 2017 at 6:17 AM
TBS Crossfire – LQ monitoring While you are flying it´s important to have a eye on your rc link. If you are not using a osd there is a alternativ way to ...
Thu, 23 Nov, 2017 at 11:24 PM
Following Futaba remotes support CRSF by software update. - T18SZ - T16SZ (separate power supply required) To get CRSF support a custom cable and...
Wed, 28 Mar, 2018 at 5:59 PM
Yes and No. To enjoy full speed of Crossfire mod inverter is needed, however, if you're not comfortable doing so you can simply lower the baudrate to 11...
Wed, 5 Dec, 2018 at 6:03 PM
When update is interrupted and receiver is no longer react to bind, you can try different way to bring it back to life. Follow instructions below according ...
Thu, 6 Dec, 2018 at 4:20 PM
TBS CROSSFIRE supports two different frequency bands which are 868mHz and 915mHz.. It operates on 868 MHz in ITU-1 (Europe), and on 915MHz (rest of the worl...
Mon, 10 Dec, 2018 at 5:25 PM
There are different possible reasons why this message occurs. a ) Taranis Jr bay pins may have not gone nicely to the Crossfire module b) Replace sd card...
Mon, 10 Dec, 2018 at 5:29 PM