Getting Problems with connecting Colibri Race to your computer?

Then this is usually a windows driver issue on your computer and you need to install the right driver.


  1. Check Windows System Setup / Devices and printers, you should see your device listed, either like this or with a exclamation mark.



If there is an exclamation mark you need to install the driver. For this download the attached driver and install it on your Computer:


After installation the driver should be installed in this directory: C:\Program Files (x86)\STMicroelectronics\STM32 ST-LINK Utility\ST-LINK_USB_V2_1_Driver



Now you need to assign the driver:




Rightclick:


Properties:



Change settings:



Update driver:



Browse my computer for driver software:




Let me pick from a list of device drivers on my computer:



Have Disk:



Browse:



Go to install directory, usually: C:\Program Files (x86)\STMicroelectronics\STM32 ST-LINK Utility\ST-LINK_USB_V2_1_Driver



OK:



Yes:



Close:



It should now look like this: