TBS Powercube

Colibri FC >v1.2 and older PDB v1.0
The new TBS Powercube Colibri FC (v1.2, V2.0 or above) is not compatible with older V1.0 PDB's out of the box. It will require a small 1 min modif...
Tue, 14 Feb, 2017 at 3:14 PM
TBS Powercube ESC has regenerative braking, is this the active braking?
Active Braking, also known as "Regenerative Braking", is a standard feature in the PowerCube and does not need to be enabled. If you connect your ...
Fri, 30 Dec, 2016 at 4:21 PM
Colibri Race Flightcontrol
There are few versions of Colibri Race released over the past few years. All V1.x Flightcontrols are based on MPU6500 IMU. (SPI based for 8kHz use) ...
Thu, 2 Feb, 2017 at 2:58 PM
TBS FPVISION
The TBS FPVision board (http://www.team-blacksheep.com/products/prod:FPVision) combines: - PDB V2.0 - PNP PRO V2.0 OSD  - Unify PRO Video transmitter ...
Tue, 28 Mar, 2017 at 10:26 AM
TBS PowerCube Elite Bundle
The Elite bundle contains the three parts: 1. FPVision http://team-blacksheep.freshdesk.com/solution/articles/4000096772-tbs-fpvision 2. ESC Extension ...
Tue, 28 Mar, 2017 at 10:46 AM
TBS Bulletproof 20A ESC
There are Versions V1.1 - V1.4 on the market.  http://www.team-blacksheep.com/products/prod:20a6s_esc There is no problem to mix different ESC versions...
Thu, 2 Feb, 2017 at 2:47 PM
Colibri flight controller cannot connect to betaflight
Getting Problems with connecting Colibri Race to your computer? Then this is usually a windows driver issue on your computer and you need to install the ri...
Tue, 14 Feb, 2017 at 6:45 PM
TBS BULLETPROOF 25A 6S - PC V2 Default Settings
ESC Overview Please download the attached ESC settings and load it through BLHeli Suite as shown below.  http://team-blacksheep....
Thu, 27 Apr, 2017 at 6:25 PM
2IN1 ESC positioning
Basically, motor position is the same as standard size cube where: top rear motor1 top front motor 2 bottom rear motor 3 bottom front motor ...
Fri, 14 Dec, 2018 at 5:55 PM
BST Blocked / Batt det failed (Core PNP/FPVision)
This means the communication over the BST port is blocked either  by a cable or by a node. PNP PRO/FPVision is not able to get any data from its peripheral...
Tue, 28 May, 2019 at 12:22 PM